Skip to Content


Free UPS Ground on orders over $700 (48 continental states)
Place your order by 2:00 PM ET for same day shipping for all items in stock
Call (937) 222-1522 ext. 8

Lock Parts

Parts › Lock Parts · See also Commercial Locks

Lock parts

Genuine replacement parts for commercial mortise and cylindrical locks: Sargent lock bodies, latchbolts and small parts, Corbin Russwin ML2000 cases and parts, Accentra parts and dormakaba Simplex pushbutton lock parts.

  • Sargent, Corbin Russwin, Accentra, dormakaba
  • Match series, function and hand
Sargent LB-8204 mortise lock body
Good to know
  • Parts are made for one lock series. A part for an 8200 will not fit a 10X.
  • Lock bodies are sold by function and hand; latchbolts by backset.
  • Ratings as the listings state them: Sargent 7800 and most 8200 bodies ANSI/BHMA Grade 1 and UL listed for 3-hour openings.

Choose a part type

Each card opens that group's parts; tap a part to buy it.

Sargent LB-8204 mortise lock body

Mortise lock bodies

Sargent 8200 and 7800 Series

  • What it is: A complete replacement lock case for a Sargent mortise lock, sold by function, such as the LB-8204 storeroom and LB-8205 office bodies.
  • Use it for: Replacing a worn or broken lock case while keeping the trim, cylinder and door prep already on the door.
  • How it fits: Fits the existing mortise pocket. Match the series (8200 or 7800), the function and the hand.
  • Ratings: The 7800 and most 8200 body listings state ANSI/BHMA A156.13 Series 1000 Grade 1 and UL/cUL listing for 3-hour A-label openings.
Series and parts

8200 Series lock bodies, 7800 Series lock bodies, All Sargent mortise lock bodies

Shop lock bodies
Sargent 82-0081 mortise lock front

Mortise lock parts

Sargent 8200 and 7800 Series

  • What it is: Small parts for Sargent 8200 and 7800 mortise locks: fronts, armor front and trim screws, mounting posts, springs, thumbturns and the 184KB emergency release.
  • Use it for: Fixing a working lock in place: a bent front, lost screws, a broken spring or a worn thumbturn.
  • How it fits: Each part replaces the same part on the lock. Check the series and the finish code (for example 32D) against your lock.
  • Ratings: These part listings state no ANSI/BHMA grade of their own.
Series and parts

8200 Series parts

Shop 8200 parts
Sargent 10-3192 guarded latchbolt

Cylindrical lock parts

Sargent 10X, 10 Line, 7 Line, 6500 and 6 Line

  • What it is: Latchbolts and inside and outside rose spring assemblies for Sargent cylindrical (bored) locks.
  • Use it for: A latch that sticks or won't retract, or levers that sag because the rose spring is worn.
  • How it fits: Latchbolts are sold by backset, 2-3/8 or 2-3/4 inch (3-3/4 inch on the 10-2053), guarded or unguarded. Rose springs are sold by lock line and by inside or outside.
  • Ratings: These part listings state no ANSI/BHMA grade of their own.
Series and parts

10X Line parts, 10 Line parts, 7 Line parts, 6500 Series parts, 6 Line parts

Shop 7 Line parts
Corbin Russwin LB-ML2010 mortise lock body

ML2000 lock bodies and parts

Corbin Russwin ML2000 Series

  • What it is: ML2000 replacement lock cases by function, plus latchbolts, auxiliary latches, spindles, lever springs and screws.
  • Use it for: Rebuilding an ML2000 mortise lock without replacing its trim, or replacing one worn part.
  • How it fits: Lock cases fit the existing ML2000 mortise pocket; match the function and the hand. Parts replace the same part in the lock.
  • Ratings: The LB-ML2010 lock case listing states ANSI/BHMA A156.13 Series 1000 Grade 1. The small parts state no grade of their own.
Series and parts

ML2000 lock bodies, ML2000 parts

Shop ML2000 parts
Accentra NexTouch replacement cylindrical lock body

Accentra lock parts

8800FL, 4600LN and NexTouch

  • What it is: Spindles for 8800 and 8800FL mortise locks, latchbolts for 4600LN cylindrical locks, and NexTouch lock bodies, thin-door kits and lever springs.
  • Use it for: Repairing an Accentra lock with the maker's own part.
  • How it fits: Spindles are sold by lock series and length; latchbolts by backset (2-3/8 or 2-3/4 inch); the NexTouch thin-door kit fits 1-3/8 inch doors.
  • Ratings: The NexTouch replacement lock body listing states ANSI/BHMA Grade 1. The other parts state no grade of their own.
Series and parts

8800FL Series parts, 4600LN Series parts, NexTouch parts

Shop 4600LN parts
dormakaba Simplex lock replacement part

Simplex lock parts

dormakaba L1000, 1000 and 5000 Series

  • What it is: Clutch assemblies and covers, combination chambers, service repair kits, drive sleeves and installation wrenches for Simplex mechanical pushbutton locks.
  • Use it for: Fixing a Simplex lock that won't take a combination or whose lever spins free.
  • How it fits: Parts are sold by series (L1000, 1000 or 5000) and many by hand, right or left. Match the part number on the old part where you can.
  • Ratings: These part listings state no ANSI/BHMA grade of their own.
Series and parts

L1000 Series parts, 1000 Series parts, 5000 Series parts

Shop L1000 parts

Guides

Tap a guide to open it.

Which lock part do I need?
How do I match a part to my lock?
  • Find the brand and series on the lock or its paperwork, such as Sargent 8200, Sargent 10X or Corbin Russwin ML2000.
  • Note the function and the hand for a lock body, and the backset for a latchbolt (measure from the door edge to the center of the lever hole).
  • Note the finish code, such as 26D or 32D, for any visible part.
  • Compare the part number on the old part with the number in the listing.
Codes and ratings

Grades and fire ratings belong to a complete lock. The Sargent 7800 and most 8200 lock body listings state ANSI/BHMA Grade 1 and UL listing for 3-hour openings, and the LB-ML2010 and NexTouch lock body listings state Grade 1. The small parts state no rating of their own. Use the maker's part for the series on fire-rated doors, and check with your inspector if you are unsure.

Other brands and unsorted parts
  • PDQ GP and GT Series latches.
  • Arrow, Progressive and SDC parts, and Sargent parts not yet in a series group, are in the full list: Arrow, Progressive, SDC, 480 Series.

Shop lock parts by manufacturer and series

Sargent

Accentra

dormakaba

Corbin Russwin

PDQ

All Sargent mortise lock bodies (8200 and 7800)

Arrow, Best, Progressive and SDC parts do not have their own series pages yet. Those parts, and Sargent parts not yet sorted into a series (including 480 Series and 8 Line parts), are in the full Lock Parts list below.

You can jump to Arrow, Progressive, SDC or 480 Series parts in this list.


All Lock Parts

Showing 25 of 498 results
Load more