Our Blog | DoorwaysPlus.com

Home
Search
⁰
Wishlist
Account

Offers
Brands
Category
Orders

Free shipping for all order of $700
Place your order by 2:00 PM EST for same day shipping for all items in stock

My Cart

My Wishlist

View Wishlist

Guest

Our Blog

Steel Flat Bar Astragals on Fire-Rated Door Pairs: Why the Meeting Stile Gap Gets Missed Until the Inspector Walks the Job

The Problem That Shows Up at the Wrong Time The door pair is hung, the exit devices are set, the closer is adjusted, and the hardware contractor is ready to hand off the opening. Then the authority ha...

NFPA 80 astragals commercial door hardware fire-rated door pairs seals and sweeps

Jun 19, 2026

Fire-Rated Automatic Door Bottoms: Why the Insert Material Gets Confirmed After the Door Schedule Is Already Printed

Why Insert Material on a Fire-Rated Automatic Door Bottom Gets Decided Too Late This guide is for commercial contractors, facility managers, and project architects who specify or install automatic doo...

NFPA 80 compliance Pemko automatic door bottoms door bottom seals fire-rated door hardware

Jun 19, 2026

Why the Wire Count on an Electric Hinge Gets Locked In Before the Access Control Scope Is Fully Written

The Decision That Looks Small Until the Door Is Already Prepped This article is for commercial subcontractors, facility project managers, and hardware specifiers who are coordinating electrified door ...

access control hardware commercial door hardware electric hinges electrified door hardware hardware specification

Jun 18, 2026

Grade 2 Passage Knob Latchsets: Why the Function Gets Specified on ADA-Route Doors Before Anyone Checks the Code

Why a Perfectly Functional Passage Knob Can Still Fail an Inspection This article is for facility managers, commercial contractors, and project architects who need to understand where a Grade 2 cylind...

ADA compliance commercial door hardware cylindrical locks door schedule passage latchset

Jun 18, 2026

Plain Bearing vs. Ball Bearing Hinges on Standard Commercial Doors: When the Cheaper Option Creates the Bigger Problem

The Bearing Choice That Gets Made at the Last Minute This article is for commercial installers, facility maintenance personnel, and project managers who need to understand when a plain bearing hinge i...

ball bearing commercial door hardware hinges maintenance plain bearing

Jun 18, 2026

Fire-Rated Automatic Door Bottoms: Why the Insert Material Gets Chosen After the Door Assembly Is Already Scheduled

The Insert Decision That Trips Up Fire Door Schedules This article is for contractors, facility managers, and architects who are specifying or replacing automatic door bottoms on fire-rated openings. ...

NFPA 80 compliance Pemko automatic door bottoms door seals and sweeps fire-rated door hardware

Jun 17, 2026

Mixed Corner Preps on Spring Hinge Replacements: Why the Square-by-Radius Profile Gets Ordered Wrong Before the Door Is Ever Measured

What This Article Covers and Who It Helps When a spring hinge fails on a self-closing door and a replacement is needed, most contractors focus on size and finish. The detail that actually causes rewor...

fire-rated hardware hinge corner profile replacement hinges self-closing doors spring hinges

Jun 17, 2026

Why the Anti-Ligature Seal Gets Ordered in a Short Roll When the Job Needs a 300-Foot Quantity

The Procurement Problem Nobody Flags Until the Door Count Is Already Wrong This article is for contractors, facility managers, and architects working on behavioral health units, psychiatric wings, cor...

NFPA 80 compliance anti-ligature hardware behavioral health doors fire and smoke seals perimeter gasketing

Jun 17, 2026

Toilet Partition Knob Sets After a Renovation: Why the Replacement Gets Specified Before the Stall Layout Is Confirmed

Why Replacement Partition Hardware Gets Ordered Wrong on Renovation Projects This article is for facility managers, maintenance coordinators, and commercial contractors who are replacing or specifying...

ADA compliance barrier-free hardware renovation hardware replacement parts toilet partition hardware

Jun 16, 2026

ADA Ramp Thresholds at Fire-Rated Openings: The Offset Dimension That Gets Ignored Until the Inspector Flags the Door

Why the Offset Dimension on an ADA Ramp Threshold Is the Last Thing Anyone Checks on a Fire-Rated Opening This article is for contractors, facility managers, and architects who specify or install thre...

ADA thresholds NFPA 80 compliance accessible door hardware fire-rated door hardware ramp thresholds

Jun 16, 2026

When the Corner Radius on a Replacement Hinge Does Not Match the Existing Mortise

Why a Small Curve on a Hinge Leaf Creates a Large Problem on the Job Site This article is for facility maintenance crews, commercial door contractors, and project managers who are replacing butt hinge...

commercial door hardware hinges maintenance replacement hardware specification

Jun 16, 2026

Baseboard Stops on Remodel Projects: Why the Projection Dimension Gets Wrong Before the Baseboard Profile Is Ever Measured

Why Baseboard Stops Cause More Rework Than Any Other Door Stop Type This article is for finish contractors, facility maintenance crews, and project managers handling door hardware on remodel or renova...

baseboard hardware commercial door hardware door stops finish specification remodel hardware

Jun 15, 2026

1
2
3
4
5