Bobrick B-5806.99 Peened Stainless Steel Grab Bar - 1-1/4" Diameter
- Satin-finish 18-gauge type 304 stainless steel tubing 1-1/4" (38mm) diameter.
- Bar passes through flange and is heliarc welded to form single structural unit.
- Cover snaps over mounting flange to conceal screws.
- Concealed mounting flange 1/8" (3mm) thick stainless steel plate, 2" W x 3-1/8" H (50 x 80mm), with two screw holes for concealed anchors.
- Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4" (85mm) dia.
- Grab bars that provide 1-1/2" (38mm) clearance from the wall can support loads in excess of 900 pounds (408-kg) when properly installed.
- Meets ADA Accessibility Guidelines in U.S.A.
- All joints and supports are contour cut and welded.
- Concealed anchors and fasteners available as an optional accessory.
- Peened non slip gripping surface.
Fasteners are not included.
Grab Bars are measured from Center to Center. Overall length is the nominal grab bar size plus 3-1/4"
| Length | 18 Inch or 36 Inch or 42 Inch |
| Brand | Bobrick |
| Product Type | Grab Bar |
Recently Viewed Items
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.