Don-Jo DEST-104 Extended Lip Dimple ASA Strike – Satin Stainless, Dark Bronze & Flat Black

The Don-Jo DEST-104 is an extended lip dimple ASA strike engineered for hollow-metal and wood-door frames where added lip depth is required to fully capture the latch bolt. Don-Jo Manufacturing produces the DEST-104 with a 4" lip (measured from center of screw hole to end of lip) and an overall 4" × 4-7/8" footprint, making it a direct fit for standard 4-7/8" ASA prep openings that demand the extra reach of an extended lip design. The signature dimple strike geometry — the shallow, pressed depression in the lip — relieves stress concentration and helps maintain a tight frame-to-door relationship over repeated latch cycles. DoorwaysPlus carries this extended lip dimple strike in three finish options: 630 satin stainless steel (US32D), Duranodic dark bronze (Don-Jo DU), and 622 / US19 flat black, letting specifiers match frame hardware finish schedules without a custom order. Note on gauge: Don-Jo's product page currently states 18 ga. (.050); however, the 2026 Don-Jo Strike-Plates catalog specifies 13 ga. (.095) for DEST-series dimple strikes. We list the catalog specification of 13 ga. (.095) as the resolved gauge — confirm with your Don-Jo rep if the heavier gauge is a specification requirement for your project.

DEST-104 Extended Lip Dimple Strike – Key Features

• Extended Lip Design: 4" lip (center of screw hole to lip end) captures the latch bolt fully in frames where a standard short-lip ASA strike falls short.
• Dimple Strike Geometry: Pressed depression along the lip distributes latch-cycle stress, reducing fatigue and helping maintain consistent latch engagement over time.
• 4-7/8" ASA Strike Pattern: Matches the industry-standard 4-7/8" ASA prep, simplifying installation in new construction and replacement applications.
• Heavy-Gauge Construction (Catalog-Specified 13 ga. / .095"): Sourced from the 2026 Don-Jo Strike-Plates catalog; substantially thicker than the 18 ga. figure shown on the Don-Jo product page — verify with your supplier if gauge tolerance is critical.
• Three Finish Options: Available in 630 satin stainless steel (US32D), Duranodic dark bronze (Don-Jo DU), and 622 / US19 flat black to coordinate with hollow-metal frame finish schedules.
• Not Handed: A single SKU installs on either hand of door, reducing the chance of ordering errors on multi-opening projects.
• Packaged for Projects: Sold in shelf packs of 10, convenient for multi-door commercial hardware schedules.

Technical Details

How to Specify / Order

Order by specifying the model and finish suffix: DEST-104 / 630 (satin stainless), DEST-104 / DU (Duranodic dark bronze), or DEST-104 / 622 (flat black). This item is non-stock and ships direct from Don-Jo; allow 3–10 business days lead time. Verify the current catalog gauge (13 ga. / .095") with your Don-Jo representative if the heavier specification is required for your project submittal.