Blog Posts | DoorwaysPlus.com

Home
Search
⁰
Wishlist
Account

Offers
Brands
Category
Orders

Free shipping for all order of $700
Place your order by 2:00 PM EST for same day shipping for all items in stock

My Cart

My Wishlist

View Wishlist

Guest

76 Articles

pin × commercial door hardware ×

The Occupancy Indicator on a Privacy Mortise Latch: Why the Spec Gets Written Before Anyone Confirms the Door Prep

What This Article Covers and Who It Helps A Grade 1 privacy mortise latchset with an occupancy indicator is a specific tool for a specific problem: a single-occupancy restroom, a medical exam room, or...

commercial door hardware healthcare hardware mortise locks occupancy indicator privacy hardware

Jun 21, 2026 Our Blog

When the 48-Inch Rim Exit Device Strike Gets Located Wrong Because No One Confirmed the Door Handing Before the Frame Was Set

The Problem That Shows Up After the Frame Is Grouted In This article is for commercial subcontractors, facility managers, and project managers who are coordinating door hardware on single doors with a...

commercial door hardware door handing egress hardware exit devices rim exit hardware

Jun 19, 2026 Our Blog

Steel Flat Bar Astragals on Fire-Rated Door Pairs: Why the Meeting Stile Gap Gets Missed Until the Inspector Walks the Job

The Problem That Shows Up at the Wrong Time The door pair is hung, the exit devices are set, the closer is adjusted, and the hardware contractor is ready to hand off the opening. Then the authority ha...

NFPA 80 astragals commercial door hardware fire-rated door pairs seals and sweeps

Jun 19, 2026 Our Blog

Why the Wire Count on an Electric Hinge Gets Locked In Before the Access Control Scope Is Fully Written

The Decision That Looks Small Until the Door Is Already Prepped This article is for commercial subcontractors, facility project managers, and hardware specifiers who are coordinating electrified door ...

access control hardware commercial door hardware electric hinges electrified door hardware hardware specification

Jun 18, 2026 Our Blog

Grade 2 Passage Knob Latchsets: Why the Function Gets Specified on ADA-Route Doors Before Anyone Checks the Code

Why a Perfectly Functional Passage Knob Can Still Fail an Inspection This article is for facility managers, commercial contractors, and project architects who need to understand where a Grade 2 cylind...

ADA compliance commercial door hardware cylindrical locks door schedule passage latchset

Jun 18, 2026 Our Blog

Plain Bearing vs. Ball Bearing Hinges on Standard Commercial Doors: When the Cheaper Option Creates the Bigger Problem

The Bearing Choice That Gets Made at the Last Minute This article is for commercial installers, facility maintenance personnel, and project managers who need to understand when a plain bearing hinge i...

ball bearing commercial door hardware hinges maintenance plain bearing

Jun 18, 2026 Our Blog

When the Corner Radius on a Replacement Hinge Does Not Match the Existing Mortise

Why a Small Curve on a Hinge Leaf Creates a Large Problem on the Job Site This article is for facility maintenance crews, commercial door contractors, and project managers who are replacing butt hinge...

commercial door hardware hinges maintenance replacement hardware specification

Jun 16, 2026 Our Blog

Continuous Hinges on High-Frequency Commercial Doors: Why the Weight Rating Gets Ignored Until the Frame Starts Pulling Away from the Wall

What This Article Covers and Who It Helps This post is for facility managers, commercial hardware contractors, and maintenance teams dealing with doors that get hit hundreds of times a day. If you hav...

commercial door hardware continuous hinges door hardware specification high-frequency doors hinge weight rating

Jun 14, 2026 Our Blog

Privacy Mortise Latchsets: Why the Cointurn Function Gets Specified Wrong for the Room Type

The Problem Nobody Catches Until the Door Is Already Hung This article is for contractors, facility managers, and architectural specifiers who are selecting or reviewing privacy mortise latchsets for ...

BHMA Grade 1 commercial door hardware hardware specification mortise locks privacy hardware

Jun 14, 2026 Our Blog

Mag Lock Kits With Keypads: Why the Egress Sequence Gets Wired Wrong Before the AHJ Ever Shows Up

What This Article Covers and Who It Helps A magnetic lock kit that includes a keypad, power supply, and push button looks straightforward on the shelf. But the moment it goes on an egress door, a spec...

access control commercial door hardware egress code compliance electromagnetic lock wiring magnetic locks

Jun 13, 2026 Our Blog

Why the 4x4 Ball Bearing Hinge Gets Skipped on Light Commercial Doors — and When That Decision Comes Back to Haunt the Schedule

The Sizing Decision Nobody Revisits Until the Door Starts Binding This article is for contractors, facility managers, and architects who have landed on a commercial door schedule and wondered whether ...

ball bearing hinges commercial door hardware hinge sizing hinges light commercial

Jun 11, 2026 Our Blog

Why a 5x4-1/2 Heavy Ball Bearing Hinge Gets Swapped for a 4-1/2x4-1/2 After the Door Is Already Hung

The Hinge Size Decision That Gets Revisited After the Door Sags This article is for commercial contractors, facilities managers, and hardware specifiers who have encountered a door that develops a sag...

NRP hinges ball bearing hinges commercial door hardware heavy weight hinges hinge sizing

Jun 10, 2026 Our Blog

1
2
3
4
5