Skip to Content


Free UPS Ground on orders over $700 (48 continental states)
Place your order by 2:00 PM ET for same day shipping for all items in stock
Call (937) 222-1522 ext. 8

Storeroom Function Locks in Unattended Spaces: Why Always-Locked Outside Is the Right Starting Point

November 21, 2026 by
David Bolton

The Problem With Doors Nobody Is Watching

This article explains storeroom lock function (BHMA/ANSI F07 and F08), where it belongs in a hardware schedule, and what facility managers, commercial contractors, and specifiers need to think through before the hardware ships. If you are asking "what lock do I use on a supply room, server room, or utility closet that nobody sits next to all day," this is the guide for you.

What Is Storeroom Function?

Storeroom function is a lockset configuration defined in the BHMA/ANSI standard. The operating rule is simple:

  • Outside lever: Always locked. A key is required to enter from the corridor side at all times.
  • Inside lever: Always free. Anyone inside can exit at any time without a key.

That inside-always-free rule is not optional. It is what keeps storeroom function compliant with life safety requirements and separates it from the more restrictive asylum (institutional) function, which locks both sides and must never be placed in an exit path without specific code authorization.

In hardware schedules you will see storeroom function listed as F07 (cylindrical lockset) or F08 (mortise lockset) under ANSI A156.2 and A156.13 respectively.

Where Storeroom Function Belongs

The common thread across all good storeroom-function applications is an unattended space that needs access control without anyone managing the door in real time. Typical locations include:

  • K-12 schools: Custodial closets, chemical storage, media equipment rooms, and IT server closets. Budget-sensitive environments benefit from simple keyed storeroom hardware that integrates into existing master key systems.
  • Healthcare: Medication storage rooms, clean and soiled utility rooms, and equipment storage alcoves where access must be restricted but egress can never be impeded. Fire-listed versions are available and often required in rated wall assemblies.
  • Industrial and manufacturing: Tool cribs, parts storage, electrical rooms, and telecom/data closets where only authorized personnel enter and the room may sit locked for entire shifts.
  • Retail and commercial: Back-of-house stockrooms, cash counting rooms, and IT closets in office buildings where a manager holds the only key.

Storeroom vs. Office Function: The Decision That Gets Missed

Office function (F05) is frequently confused with storeroom function in early hardware schedules. Here is the practical difference:

  • Office function (F05): Outside lever is locked by key, but staff inside can toggle the outside lever to unlocked using a push button or thumbturn. Useful when an occupied office should be accessible during business hours.
  • Storeroom function (F07/F08): Outside lever is always locked regardless of what anyone inside does. There is no manual override. A key is required every single time someone enters from outside.

For a room that is unattended most of the time, office function creates a risk: the last person out may leave the button in the unlocked position. Storeroom function eliminates that variable entirely. The door is always secure from the outside, full stop.

Electrified Storeroom Function: Adding Access Control Without Changing the Concept

When a space needs card or credential access instead of a physical key, the storeroom concept translates directly into electrified hardware. An electric mortise lock in fail-secure, storeroom configuration keeps the outside lever dead by default. When a valid credential is presented at a card reader, the solenoid changes the function momentarily to allow entry, then returns to locked. The inside lever remains free at all times for mechanical egress.

This configuration is common on:

  • Server rooms and IT closets in commercial office buildings
  • Pharmacy storage and clean utility rooms in healthcare
  • Restricted access corridors in industrial facilities

Key supporting hardware for these openings includes an electric power transfer (EPT) at the hinge to carry wiring to the lock, a card reader on the exterior, a request-to-exit (REX) device on the interior frame, and a door position switch at the frame head. A door closer is also standard to ensure the opening does not remain ajar.

Hardware Considerations for the Full Opening

Specifying the lockset function is only one part of the hardware set. For storeroom openings in unattended spaces, also confirm:

  • Closer: Unattended doors need a reliable overhead closer so the latch actually engages after every use. Grade 1 closers from lines such as Norton, Hager, or Accentra (formerly Yale) are well-suited for high-cycle utility applications.
  • Hinges: Specify heavy-duty ball-bearing hinges appropriate for door weight and frequency. McKinney, Hager, and Markar are solid options for hollow metal applications.
  • Keying: Storeroom function doors are typically included in a facility master key or grandmaster key system. Confirm keying requirements before the hardware ships.
  • Mortise vs. cylindrical: Mortise locksets (F08) offer greater durability and are preferred in high-traffic or high-security applications. Cylindrical locksets (F07) are cost-effective for lower-frequency spaces. Sargent, Corbin Russwin, and Hager offer strong options in both body types.
  • Fire rating: If the opening is in a rated wall, verify that the lockset carries a fire listing appropriate to the assembly. A cross-reference number alone does not confirm fire label compliance.

A Note on Double-Cylinder Storeroom Variants

Some hardware schedules call for a storeroom double-cylinder function, where a key is required on both sides. This is appropriate for certain high-security spaces but must never be placed in an exit path that serves as a required means of egress. If there is any question about egress requirements for the opening, that determination belongs in the design phase, not on the job site.

Get the Right Function Specified the First Time

Storeroom function is one of the most widely used institutional security functions in commercial hardware, but it only does its job when it lands on the right opening. If you are building a hardware schedule for a school, healthcare facility, office building, or industrial plant and need help matching the correct function to each door, the team at DoorwaysPlus.com can help you work through the schedule before anything ships.

David Bolton November 21, 2026
Share this post
Archive
Door Bottom Guards and Impact Protection: Stopping Daily Damage Before It Reaches the Door Face