?unique=b05465d)
Sargent 775-8 ETL 24VDC Fail-Safe Electrified Exit Lever Trim – 8800 Series Rim
**** Note: This is intended for Wide Stile (8800 Series) Rim Exit Devices ****
The Sargent 775-8 ETL is a heavy-duty electrified outside lever trim specifically designed for the Sargent 8800 Series Rim Exit Device. This trim provides high-security electrified access control while maintaining a mechanical key override for emergency backup. Engineered with Fail-Safe operation and energy-efficient EcoFlex™ technology, it is the industry standard for perimeter doors and high-traffic corridors requiring centralized locking management.
Advanced Security and Electrified Performance
The 775-8 ETL allows facilities to manage building security remotely without sacrificing the rugged mechanical reliability of the Sargent 80 Series.
- Fail-Safe (Power-to-Lock) Operation: The lever is unlocked when power is removed. This is a critical requirement for life-safety and fire-rated openings where the door must allow re-entry during a power outage or fire alarm.
- EcoFlex™ Technology: This actuator system reduces power consumption by up to 95% compared to traditional electrified hardware. With a continuous draw of just 15mA, it significantly lowers operating costs and allows more hardware to be powered by a single supply.
- Mechanical Key Override: As a 75 Function (Storeroom Electrified), the lever is always locked from the outside unless energized. However, the integrated cylinder hole allows a mortise cylinder to mechanically retract the latch for manual access.
- Vandal-Resistant Engineering: The ETL escutcheon is through-bolted to the door for superior stability and is ANSI/BHMA Grade 1 certified to withstand the rigors of institutional environments.
Technical Specifications
| Feature | Details |
| Manufacturer | Sargent (ASSA ABLOY) |
| Model Number | 775-8 ETL |
| Voltage | 24VDC (Regulated/Filtered) |
| Locking State | Fail-Safe (Power Off Unlocks Lever) |
| Compatible Device | 8800 Series Rim Exit Devices |
| Finish | US26D (626) Satin Chrome |
| Function | 75 Function (Electrified with Key Override) |
| Current Draw | 15mA Continuous @ 24VDC |
| Cylinder Type | Requires #34 Rim Cylinder (Included unless ordered Less Cylinder |
| Handing | Handing Required (Specify LHR or RHR) |
High-Intent Commercial Applications
The Sargent 775-8 ETL 24VDC is frequently specified for commercial projects requiring a balance of centralized electronic control and mechanical redundancy.
- Commercial Offices & Retail: Provides a sleek, US26D aesthetic for electrified rim openings that must remain accessible during building emergencies.
- Healthcare & Staff Entry: Ideal for staff-only access points that require card-reader security with a physical key backup for maintenance or emergency bypass.
- Educational Institutions: A rugged, energy-efficient solution for securing perimeter rim-device doors on high-traffic campus buildings.
- Life-Safety Compliance: While the exterior is access-controlled, the interior 8800 Series exit device always ensures immediate, free egress for building occupants.
Critical Ordering & Installation Notes
- Handing Required: This trim is handed and is not field-reversible. You must specify Left Hand Reverse (LHR) or Right Hand Reverse (RHR) based on your door swing when placing your order.
- Cylinder Selection: This trim is typically provided Less Cylinder. You will need a Sargent #41 Mortise Cylinder or a compatible 1-1/8" mortise cylinder to complete the installation.
- Power Requirements: To ensure the longevity of the EcoFlex™ actuator, always use a filtered and regulated 24VDC power supply.
Special Note: The door handing information is needed upon order placement. If you are unsure of the handing of your door, please compare the picture below to your opening for clarification.
For more information as to which 700 Series Trim goes with which 80 Series Device please see below:
| Finish with BHMA code | 626 - US26D Satin Chrome or 613E - US10BE Oil Rubbed Bronze Equal |
| Door Handing | RHR or LHR |
| Cylinder Options | LA Keyway or Less Cylinder |
| Brand | Sargent |
| Series | Sargent - 700 ET Series, Sargent - 80 Series |
| Trim Design | ETL |
| Voltage | 24 VDC |
| Exit Device Trim Function | Fail Safe |
Recently Viewed Items