Bobrick WingIt Grab Bar Fastener 251-4 for Hollow Walls

WingIt Grab Bar Fastener 251-4 - Order 1 per flange

• Corrosion-resistant stainless steel.
• Install all Bobrick Grab Bar Series without backing; no need to open and reconstruct walls.
• For walls with a min. of 5/8" (16mm) thick painted or tiled drywall.
• Can also be used on 1/2" (13mm) thick drywall with added finished wall material.
• Fastener will support 300-lb load exceeding all building code and governmental agency guidelines including ADA Accessibility Guidelines in the U.S.A.
• For 2-1/2" and 3-1/2" (65 and 90mm) or deeper hollow walls with finished wall surfaces 1/4" to 1-1/2" (6 to 38mm) thick.
• One fastener required for each flange.
• WingIt is a trademark of WingIt Innovations, LLC.

Will work with B5806 or B6806 series grab bars