Call Us: (937) 222-1522

Securitron Solar Power Supply 12V, BPSS-10W Panel

Availability: In stock


Quick Overview

Securitron Solar Power Supply, BPSS-10W with Solar Panel and 9Ah Battery

Securitron BPSS Solar Power Supply

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Securitron BPSS Solar Power Supply


Securitron BPSS 10 charging watts - Solar  Power Supply

Securitron®'s BPSS is capable of powering most any single point access control device and fail secure lock (intermittent duty only) using sustainable solar and battery operated power. The BPSS is the only out-of-the-box solution specifically designed for remote electric lock control. Select the BPSS-10 or BPSS-20 (10 or 20 charging Watts respectively) based on the solar activity in the area/region where installed.

Product Features

  • Complete out of the box Solar Power System designed specifically for use with Access Control Products
  • Remote electronic locking of gates and out buildings
  • Works with most fail secure electric locks
  • Works with most keypad or card readers
  • Available in 10W and 20W versions
  • Outdoor Operation
  • 100% Solid State Solar Controller
  • Low voltage battery monitor to protect batteries from deep discharge
  • Includes mounting brackets for power supply enclosure and solar panel
  • Optional mounting brackets available to mount power supply enclosure to 3" diameter pole
  • Optional solar wind kit available for high wind areas - only available for 20W panel - recommended for winds greater than 50 miles per hour

Included Solar Panel Mounting Kit

Specification Data

Enclosure dimensions:
    Outdoor (NEMA-3R) - 12-1/2" x 13-5/8" x 4-7/16"
Standard Enclosure Brackets: Accommodates up to 2" diameter pole/post
Operating Temperature: -4 to +113F [-20 to +45C]
Power Supply Output:
Maximum 125mA continuous; 450mA maximum operating the locking device - intermittent duty only. Number of daily lock operations will vary due to solar activity and current draw

BPSS-10 Solar Panel:                            
   Size: 14.5" x 12.2" x .7"
   Rated Power: 10 Watts
   Panel Weight: 3.3 lbs
Panel Mounting Brackets: Accommodates up to 2" diameter pole/post
Panel(s) Operating Temperature: -40 to +185F [-40 to +85C]
Panel(s) Type: High-efficiency photovoltaic modules using silicon nitride multicrystalline cells
Controller: Anodized aluminum case with marine rated terminals
100% solid state
Fully encapsulated in epoxy potting
Green charging LED
Approved for use in hazardous locations - Class 1, Division 2, Groups A, B, C, D
Voltage Output: 14.4VDC maximum
Warranty: SecuriCare 3 Year NO FAULT Warranty

Optional: Achieve 30 total Watts of charging power by adding to the basic system with a second SPK Solar Panel Kit - includes additional 20W solar panel and standard brackets - if second set of 3" bracket (PMK-3) or High Wind Kit (SWK) are require, please contact us with a request for quote

Direction of Solar Panel
It is important for proper solar power system operation that the array panel be oriented toward true South (if you are located in the northern hemisphere). The directions of magnetic South and true South differ from one another depending on geographic location. This variance is called declination.

Check the declination for your region in order to extrapolate true South from a compass heading of magnetic South. There is a map and calculator available online which shows the magnetic declination for various locations in the US at: NOAA Magnetic Field Calculators
(For example, true south in central Texas falls between the 7 degree East and the 8 degree East lines. This means that, for optimum exposure, the solar panel should be aligned 7-8 degrees east of magnetic South (on a compass).

Additional Information

Weight 20.0000
Manufacturer Securitron
Ampage No
Voltage 12 VDC

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.