McKinney TA2714 QC4 4-1/2" x 4-1/2" ElectroLynx Electric Hinge US26D

McKinney TA2714 QC4 4-1/2" x 4-1/2" ElectroLynx Electric Hinge, 5 Knuckle, Full Mortise with US26D plated finish

McKinney’s ElectroLynx Quick Connect electrified hinge offers the perfect solution for door openings that use electrified hardware. Installer-friendly “plug and play” ElectroLynx® connectors take the guesswork out of wiring and offers an quick method for connecting power from the source through the hinge to the electrified hardware.

Each hinge features concealed plug connectors that eliminate the need for separate or exposed wiring. Standard connectors make installation quick and simple. Brass eyelets add protection and durability.

McKinney electric hinges are UL listed, and may be used on fire rated doors up to 3 hours.

For 4 amp continuous @ 24 volts AC or DC per circuit, 28 gauge multi-strand wires are used. A pigtail is provided for connection to the source wiring
An 8 position connector is used for QC2, QC4, QC6 and QC8 wire hinges. An 8 position and a 4 position connector is used for QC12 wire hinges.

QC4 is 4 Wires, 2 Circuits

Oil Impregnated Bearing (TA Prefix)
One piece, non-ferrous, and self-lubricating bearings ensure even longer-lasting wear and resistance to clogging, corrosion, and hinge failure.

Hinges are for use on average traffic in commercial construction. Hinges are furnished with All Wood Screws (1 1/4" x 12 FPHW) and All Machine Screws (1/2" x 12-24 FPHM) Non Rising Steel Pin with Button Tips. Commercial Grade Hinges are .134 thickness with template screw hole pattern.

Hinges are sold as Each

ANSI Number:  A8112

DoorwaysPlus Finishes Guide