Details
McKinney TA2314 4" x 4" Bearing Non Ferrous Hinge, 5 Knuckle, Full Mortise with plated finish
Oil Impregnated Bearing (TA Prefix)
One piece, non-ferrous, and self-lubricating bearings ensure even longer-lasting wear and resistance to clogging, corrosion, and hinge failure.
Hinges are for use on medium weight doors or doors requiring low frequency service. Hinges are furnished with All Wood Screws (1 1/4" x 12 FPHW) and All Machine Screws (1/2" x 12-24 FPHM) Non Rising Stainless Steel Pin with Button Tips. Commercial Grade Hinges are .130 thickness with template screw hole pattern.
Please Note: Commercial Grade Hinges do not have the same screw hole pattern or thickness as residential grade hinges. If you require residential hinges; please use this quick link to the residential hinges on our website
Hinges are sold as Each
Please Note - Brass based material is not approved for fire rated doors, only the US32D Stainless Steel finish is approved for Fire Rated Doors.
ANSI Number: A2112 (Brass) or A5112 (Stainless Steel)
Additional Information
Weight | 1.0000 |
---|---|
Manufacturer | McKinney |
Hinge Bearings or Spring | Oil Impregnated Bearing |
Hinge Options | No |
Hinge Grade/Thickness | Standard Wt .119 to .146 |
Hinge Mounting | Full Mortise |
Hinge Height | 4.0" Hi |
Hinge Width | 4.0" Wi |
Hinge Corners | Square |
Hinge Knuckle | 5 Knuckles |
Base Material | Non Ferrous |
Unit of Measure | Each |