HMC Door Pressure Gauge DPG

 HMC Door Pressure Gauge DPG - an instrument designed specifically to measure force

• This instrument is capable of measuring the entire range of forces found in servicing interior and exterior doors
• 0-35 pound force range
• Also reads Kilograms
• Also may be used to determine correct belt tensions on drives of auxiliary equipment such as air compressors, fans and refrigeration and air conditioning equipment

Meet ADA Requirements and Satisfy Codes pertaining to Fire and Elevator Doors

HMC Door Pressure Gauge DPG Operation Instructions

1. Set the top (small) O Ring located on the plunger rod on zero, down against the instrument's flange, or on desired maximum force.
2. Holding the Instrument firmly, press slowly against a given door at a point approximately handle high and 30 inches toward the handle from the door's hinges.
3. Read the amount of force required to open the door on the plunger scale closest to the bottom of the small O ring.

HMC Door Pressure Gauge DPG  measures Pounds and Kilograms