Details
Hager Ecco ECBB1102 NRP 5 x 4 1/2 Full Mortise - Ball Bearing Hinge, Heavy Weight, Steel with US26D Finish.
5" height x 4 1/2" width
Furnished standard with 1/2 wood screws (1 1/4" x 12 FPHW) and All machine screws (1/2" 12-24 FPHM)
Hinges are .188 thickness, For 1 3/4" door thickness. For use on heavy weight doors or doors requiring high frequency service.
Material:
- Steel with Steel pin
- Non-rising removable pin with button tip and plug
- Four ball bearings
ANSI A8111
Non-Removable Pin (NRP) for Medium Security
The Non-Removable pin has a small set screw in the body of the barrel. This set screw is tightened down against the pin. The pin has a groove in the position where the set screw makes contact, allowing the set screw to seat. The set screw is positioned so it cannot be reached unless the door is opened. If pin removal is necessary, the set screw is merely removed and the pin tapped from the bottom in the usual manner.
Additional Information
| Weight | 1.6700 |
|---|---|
| Manufacturer | Hager |
| Hinge Bearings or Spring | Ball Bearing |
| Hinge Options | NRP (Non Removable Pin) |
| Hinge Grade/Thickness | Heavy Wt .180 to .190 |
| Hinge Mounting | Full Mortise |
| Hinge Height | 5.0" Hi |
| Hinge Width | 4.5" Wi |
| Hinge Corners | Square |
| Hinge Knuckle | 5 Knuckles |
| Base Material | Steel |
| Unit of Measure | Each |
Check items to add to the cart or select all
-
McKinney TA2714 4.0" x 4.0" Bearing Hinge
Add to Wishlist -
McKinney TA2314 NRP SSF 4-1/2" x 4-1/2" Bearing Hinge Safety Stud - US32D
Add to Wishlist -
Hager 1279 4 1/2 x 4 1/2 Plain Bearing Hinge
Add to Wishlist -
McKinney T4A3786 NRP 5" x 4-1/2" Bearing Hinge - US26D
Add to Wishlist -
McKinney T4A3786 4-1/2" x 4-1/2" Bearing Hinge
Add to Wishlist
You have no items to compare.
You have no items in your shopping cart.
