Details
Hager BB1199 NRP 4 1/2 x 4 1/2 Full Mortise - Ball Bearing Hinge, Heavy Weight, Non Ferrous Material - Brass with plated finish or Stainless Steel.
Furnished standard with 1/2 wood screws (1 1/4" x 12 FPHW) and All machine screws (1/2" 12-24 FPHM)
Hinges are .180 thickness, For 1 3/4" door thickness. For use on heavy weight doors or doors requiring high frequency service.
- Non-rising removable pin with button tip and plug
- Four ball bearings
Material:
-Brass with Stainless Steel pin - ANSI A2111 (US10B, US26D Hinges)
-Stainless Steel with Stainless Steel pin - ANSI A5111 (US32D Hinges)
Hager Companies standard grade stainless steel is type 304L
Please Note: Hinges with Brass base material are not allowed on UL Fire Rated Door Openings.
Non-Removable Pin (NRP) for Medium Security
The Non-Removable pin has a small set screw in the body of the barrel. This set screw is tightened down against the pin. The pin has a groove in the position where the set screw makes contact, allowing the set screw to seat. The set screw is positioned so it cannot be reached unless the door is opened. If pin removal is necessary, the set screw is merely removed and the pin tapped from the bottom in the usual manner.
Additional Information
Weight | 1.4500 |
---|---|
Manufacturer | Hager |
Hinge Bearings or Spring | Ball Bearing |
Hinge Options | NRP (Non Removable Pin) |
Hinge Grade/Thickness | Heavy Wt .180 to .190 |
Hinge Mounting | Full Mortise |
Hinge Height | 4.5" Hi |
Hinge Width | 4.5" Wi |
Hinge Corners | Square |
Hinge Knuckle | 5 Knuckles |
Base Material | Non Ferrous |
Unit of Measure | Each |