Details
Hager BB1129 NRP 4 1/2 Ball Bearing Half Mortise Hinge, 5 Knuckle, Steel - USP Prime Painted
Half Mortise Hinges are Mortised in the edge of the door, Surface Mounted on face of frame.
Screws furnished standard are 1/2" 12-24 FPHM
Hinges are .134 thickness, For 1 3/4" door thickness. For use on medium weight hollow metal doors with channel iron frames requiring medium frequency service
ANSI A8212
-Two Ball Bearings
-Non-rising removable pin with button tip and plug
-Beveled surface leaf
-Reversible
-Steel with steel pin
Non-Removable Pin (NRP) for Medium Security
The Non-Removable pin has a small set screw in the body of the barrel. This set screw is tightened down against the pin. The pin has a groove in the position where the set screw makes contact, allowing the set screw to seat. The set screw is positioned so it cannot be reached unless the door is opened. If pin removal is necessary, the set screw is merely removed and the pin tapped from the bottom in the usual manner
Additional Information
| Weight | 0.9000 |
|---|---|
| Manufacturer | Hager |
| Hinge Bearings or Spring | Ball Bearing |
| Hinge Options | No |
| Hinge Grade/Thickness | Standard Wt .119 to .146 |
| Hinge Mounting | Half Mortise |
| Hinge Height | 4.5" Hi |
| Hinge Width | No |
| Hinge Corners | Square |
| Hinge Knuckle | 5 Knuckles |
| Base Material | Steel |
| Unit of Measure | Each |
Check items to add to the cart or select all
-
McKinney T2714 NRP 4-1/2" x 4-1/2" Plain Bearing Hinge
Add to Wishlist -
McKinney HT4A3386 4-1/2" x 4-1/2" Hospital Tip Bearing Hinge - US32D
Add to Wishlist -
Hager HT-BB1168 5 x 4 1/2 Ball Bearing Hinge with Hospital Tip
Add to Wishlist -
McKinney TA714 5" x 4-1/2" Concealed Bearing Hinge US26D
Add to Wishlist -
McKinney TA2314 NRP SSF 4-1/2" x 4-1/2" Bearing Hinge Safety Stud - US32D
Add to Wishlist
You have no items to compare.
You have no items in your shopping cart.
