Details

Detex Surface Mount Exit Alarm ECL-230X

EXIT CONTROL LOCKS
ECL-230X (Dead Bolt) Exit Control Hardware - Single Point Lock
The ECL-230X is a code compliant, battery alarmed, rugged dead bolt, panic device with photo-luminescent sign providing maximum security and a 100 decibel alarm for secondary exits.

Benefits

Attack resistant design for maximum holding force
Proven durability and reliability at a reasonable price
Easy to install
Reduces employee and customer theft
Time tested construction resists attack from the inside
One size fits 36”-48” doors for code compliant acceptance
For additional security with 4 locking points, specify ECL-230X-DX3
Easy to see if the lights go out
Straightforward operation that everyone understands

Features

Deadbolt lock -1” throw with just over 3/4” engagement with the frame
Saw resistant deadbolt
Corrosion resistant alloy lock body
100 decibel alarm, powered by 9-volt battery (included)
Surface/flush reversible strike
Accepts 5-pin through 7-pin standard and interchangeable core rim cylinders without using cylinder collar
Durable photo-luminescent sign absorbs light to then "glow in the dark" when lights are dimmed
Locking and unlocking (dead bolt) always arms and disarms the alarm
Non-handed
Low profile meets International Building Code requirement allowing for 4” maximum projection off face of door
Resetting the alarm can only be accomplished with a control key
For 9VDC hardwiring add BE-961-1 or BE-961-2
10 Year Limited Manufacturers Warranty

Mechanical Options

Gray Finish (Std.)
H - Hurricane Rated
W - Weatherized Unit - Weatherized electronics certified to Driving Rain and Salt Fog Test
30 - Fits 30” wide door
DX1 - Add hinge side protection with one hinge bolt for 2 locking points (3/4” frame engagement)
DX2 - Add hinge side protection with two hinge side bolts for 3 locking points (3/4” frame engagement)
DX3 - For maximum hinge side protection add three hinge side bolts for 4 locking points (3/4” frame engagement)
English Push Plate Sign (Std.) other languages available
03T - Outside Trim Plate
03PP - Outside Pull Plate Rim cylinder required for 03 Trims
01T - Outside Trim Plate
01PP - Outside Pull Plate
IC7R - Interchangeable core housing installed in Lock & or Trim
IK7R - InstaKey Cylinder installed in Lock & or Trim
RC65 - Rim Cylinder, Schlage “C” Keyway with 2 keys installed in Lock & or Trim
IP - Inside Pull, Provides grip handle on inside of door, assists in pulling door closed and locking door
DDSK - Double Door Strike Kit
SN1 - Sex Nut Kit
CL - Cover Lock (Standard on TB configuration) Provides additional protection for battery protection
SS - Security Screws
CL-SS - Cover Lock & Security Screws
RK - ECL-230D RetroFit Kit (End-cap plate & lock-body plate)
BE-961 - Hardwired Conversion Kit, eliminates battery