Bobrick B517 Folding Padded Shower Seat - RH

Bobrick B517 Folding Shower Seat

Shower seat can be folded up against the wall when not in use. The spring at the top of baseplate locks seat into an upright position until released by pulling the top of seat away from wall. Support system with guide bracket allows varying mounting heights and leaves floor clear for easier cleaning. Bobrick shower seats when properly installed, have sufficient strength to support 360 lbs., (16 kg) complying with accessible design (including ADAAG in the U.S.A.) for structural strength.

Complies with Planning Guide for Accessible Restrooms. Foam-padded, white, water-resistant Naugahyde seat 1 1⁄2" (38mm) thick, with enclosed 1⁄2" (13mm) plywood base. Frame and mounting brackets are type 304 stainless steel and Feature self-locking mechanism. Supports up to 360 lbs (163 kg) when properly installed. Seat 32 7⁄8" (835mm) wide, projects 22 11⁄16" (575mm) from wall. Right-hand seat. CAUTION NOTE: L-shaped folding shower seat, when properly installed and maintained, has sufficient strength to support a single user up to a maximum static load of 360 lbs (163 kg). In the interests of safety and the protection of end users, this seat should not be used to support weights exceeding 360 lbs (163 kg). Failure to abide by this warning may result in seat malfunctioning, potentially causing minor to moderate injury. TOTAL WEIGHT ON SEAT MUST NOT EXCEED 360 LBS (163 KG).

If you have questions on how to hand shower seat, our blog on the subject may help.