Details
Alarm Lock Exit Alarm with Strobe PG21MSS
The PG21MSS is a magnetic contact controlled door alarm for surface mounting on a door or door frame. Typical applications include emergency fire escape doors,nursing home stairwell doors, rear restaurant and theater doors. PG21MSS is designed to continually monitor the status of a door. When opened, the protected door triggers an alarm sounder, an optional strobe or can activate another device via a Form-C relay.
Features:
Two selectable arming modes:
-
Always armed mode: when key is turned counter clockwise to the disarm position, the key cannot be removed. To remove key, turn back to arm mode, thus keeping unit armed always.
- Standard arming mode: when key is inserted turning counter clockwise will disarm and key can be removed. Turning key clockwise will arm and key can be removed.
- Max-Flex Terminals, allowing for any or all of the following:
- Continuous power with the addition of an external power supply
- Multiple door monitoring permitted with built-in external reed switches
- Status Indicator: The LED will indicate RED when armed.
- Entry Delay Time Options: include 15 seconds, 1 minute 15 seconds & 3 minutes 15 seconds
- Sleek model design key-activated door alarm for use on standard size and narrow stile doors
- Unauthorized use of door causes alarm to sound and activates LED indicator
- Options include continuous alarm, minute shutdown with auto reset and exit/entry delay
- Uses standard mortise cylinder
- Tamper switch supervised
- For exterior key control, optional RIM cylinder may be used
- Metallic silver or duranodic finish
- Optional Strobe unit (shown) PG21MSS units include a highly visible amber strobe will flash when unit goes into alarm
Finishes:
MS - Metallic Silver
*** Note: Mortise Cylinder (1-1/4" length) not included ***
Additional Information
Weight | 6.0000 |
---|---|
Manufacturer | Alarm Lock |