Call Us: (937) 222-1522

Securitron EPT Concealed Electrical Power Transfer

Availability: In stock

$62.10

Quick Overview

Securitron EPT Concealed Electrical Power Transfer


Lead time: standard EPT stock, all other options 3-5 Business Days

Securitron EPT Electric Power Transfer

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Securitron EPT Electric Power Transfer
$62.10

Details

Securitron EPT Concealed Electrical Power Transfer

 Concealed, Tamper Resistant, Flexible Power and Data Transfer
The EPT Electric Power Transfer provides concealed, secure power and data conduit between a frame and door, transmitting power to electrified locks, exit bars and more. Its durable stamped steel housing and flexible spring steel conduit make the EPT suitable for most types of swinging doors with butt or continuous hinges or pivot hinges up to 3/4" offset. The EPT-SC accommodates swing-clear hinges and most pivot hinges.

The EPT is used for door swing gap distances of 2-1/2” [63,5mm] or less between door edge and the door frame. The EPTL is used for longer door swing gap distances greater than 2-1/2” [63,5mm].
A simple measurement may be taken to determine the correct EPT/EPTL for the application. To measure the swing gap distance, open the door its full travel distance. Measure the distance from the centerline of the door edge to the centerline position on the door frame as shown in Figure 1. If this distance is 2.5” [63,5mm] or less an EPT may be used. If the distance is greater than 2.5” [63,5mm] an EPTL must be used. Once the correct unit is determined, use the following step by step procedure to correctly install the EPT/EPTL.

Securitron EPT Gap Distance diagram

A note of caution - Securitron advises "The door stile, number of hinges and distance between hinges may vary depending upon the door manufacturers. Consult the specific door manufacturer to help decide if the EPT/EPTL will fit the application." The normal placement of the EPT is in between the top hinge and the middle hinge or between the second and third hinge for 8/0 openings. The Long version may not work for example on the 8/0 openings due to the distance between the hinges not being enough. SDI Current door/frame hinge location chart - column D tells the story of this conflict - deduct approx 6 inches from the dimension (4.5" hinge + 1.5" for tap plates) in column D. 

Product Features

  • Installs in the door and frame edges
  • Flexible steel shield protects wires up to 5/16" thick - 3/8" [9,5mm] inside diameter
  • Will work on any door using butt hinges, continuous hinges and some offset pivot hinges
  • Not for use with center pivot doors or with pivot hinges with offset greater than 3/4 inch
  • Rounded mounting tabs
  • MagnaCare Lifetime Replacement No Fault Warranty

Product options

  • EPT for standard hinges and pivot hinges less than 3/4" offset
  • EPTL for extended length
  • EPT-SC for swing clear hinges or pivot hinges with larger offset; not for use with center pivot doors
  • EL- Models are ElectroLynx compatible including 12  22 AWG wires, ElectroLynx connectors

Specifications

  • UL 10C Listed
  • CAN4-S104 Listed
  • UL 634 Listed (EL-EPT/ EL-EPTL)
  • ULC/ORD-C634 (EL- EPT/EL-EPTL)
  • ANSI/SDI-BHMA A250.13 (+/- 60 PSF) Windstorm Listed

Dimensions:

  • EPT Housing - 12-3/4"L x 7/8" W x 11/16" D
  • EPTL Housing - 21-3/8"L x 7/8" W x 11/16" D
  • Interior flex shield 3/8" [9.5mm]

Finishes:

  • US26/625 - Bright Chrome plated

Additional Information

Weight 0.7500
Manufacturer Securitron

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.