Toilet Room Accessoriesby DoorwaysPlus

Bobrick B-6806 x 48 inch Stainless Steel Grab Bar

Satin-finish 18-gauge type 304 stainless steel tubing 1-1/2" (38mm) diameter. 
 
Bar passes through flange and is heliarc welded to form single structural unit. 
 
Cover snaps over mounting flange to conceal screws. 
 
Concealed mounting flange 1/8" (3mm) thick stainless steel plate, 2" W x 3-1/8" H (50 x 80mm), with two screw holes for concealed anchors. 
 
Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4" (85mm) dia. 
 
Grab bars that provide 1-1/2" (38mm) clearance from the wall can support loads in excess of 900 pounds (408-kg) when properly installed. 
 
Meets ADA Accessibility Guidelines in U.S.A. 
 
All joints and supports are contour cut and welded. 
 
Concealed anchors and fasteners available as an optional accessory. 
 
Peened nonslip gripping surface available by quote. 

Fasteners are not inclued.

Grab Bars are measured from Center to Center. Overall length is the nominal grab bar size plus 3 1/4"

Visit Bobrick's Website for more information (put "6806" in search box) or B-6806 Grab Bar Tech Data Sheet