Hingesby DoorwaysPlus

Hager EC1105 4 1/2 x 4 1/2 Spring Hinge, Single Acting, Steel with plated finish.

Furnished standard with All wood screws (1 1/4" x 12 FPHW) and All machine screws (1/2" 12-24 FPHM)

Hinges are .134 thickness, For 1 3/4" door thickness.

Stock finishes include USP (prime for paint) US26D, US10B & US3. Other finishes available by quote include: US4, US15 & US26.

Maximum Door Size: For labeled doors 4'' x 8'' the maximum door size is based on the limits set forth by NFPA Standard #80. Labeled Doors require Ball Bearing hinges. For non-labeled doors 4''0" wide, 4" x 4" Spring hinges are not recommended. For non-labeled doors over 7''6" in height, use an additional hinge for each additional 30" of height or fraction thereof. For automatic closing. Meets codes for hotels, motels, institutions, and commercial buildings. Standard screw pack on 4 1/2” all machine, all wood..

Material: - Steel with Steel components ANSI K81071F

Recommend use:

1 Spring Hinge for doors weighing up to 70 lbs - use ECBB1100 for the balance two hinges

2 Spring Hinges for doors weighing up to 115 lbs - use ECBB1100 for the balance hinge

3 Spring Hinges for doors weighing up to 150 lbs

For more information visit Hager's website on the EC1105 Sping Hinge or Template or Installation Instructions

See Product Finishes