Hingesby DoorwaysPlus

Hager ECBB1103 NRP 4 1/2 x 4 1/2 Full Mortise - Ball Bearing Hinge, Heavy Weight , Stainless Steel.

Furnished standard with 1/2 wood screws (1 1/4" x 12 FPHW) and All machine screws (1/2" 12-24 FPHM)

Hinges are .180 thickness, For 1 3/4" door thickness. For use on heavy weight doors or doors requiring high frequency service.

Stock finish is US32D Stainless Steel. Other finishes available by quote include:  US10B, US15 & US26.

- Non-rising removable pin with button tip and plug

- Four ball bearings

Material:

-Brass w/ Stainless Steel pin ANSI A2112

-Stainless Steel with Stainless Steel pin ANSI A5112

Non-Removable Pin (NRP) for Medium Security

The Non-Removable pin has a small set screw in the body of the barrel. This set screw is tightened down against the pin. The pin has a groove in the position where the set screw makes contact, allowing the set screw to seat. The set screw is positioned so it cannot be reached unless the door is opened. If pin removal is necessary, the set screw is merely removed and the pin tapped from the bottom in the usual manner.

For more information visit Hager's website on the ECBB1103 NRP hinge or Template

See Product Finishes