Hingesby DoorwaysPlus

Hager BB1191 NRP 4 1/2 x 4 1/2 Full Mortise - Ball Bearing Hinge, Stainlees Steel or Brass with plated finish. Non-Ferrous Material

Furnished standard with 1/2 wood screws (1 1/4" x 12 FPHW) and All machine screws (1/2" 12-24 FPHM)

Hinges are .134 thickness, For 1 3/4" door thickness. For use on medium weight doors or doors requiring low frequency service.

Stock finish is US26D & US32D (Stainless Steel). Other finishes available by quote include:  US3, US4, US10, US10B, US15, US26. Other options available by quote include special tips (hospital tip, ball tips, acorn tips, steeple tips, urn tips), round corners - 1/4" or 5/8" radius, wide throw hinges and/or special width or height & electric modifications

- ANSI A2112 (Brass)

- ANSI A5112* (Stainless Steel)

- Two ball bearings

- Non-rising removable pin with button tip and plug

Material:

- Brass with Stainless Steel pin (US26D hinges)

- Stainless Steel with Stainless Steel pin (US32D hinges)

Non-Removable Pin (NRP) for Medium Security

The Non-Removable pin has a small set screw in the body of the barrel. This set screw is tightened down against the pin. The pin has a groove in the position where the set screw makes contact, allowing the set screw to seat. The set screw is positioned so it cannot be reached unless the door is opened. If pin removal is necessary, the set screw is merely removed and the pin tapped from the bottom in the usual manner.

For more information visit Hager's website on the BB1191 hinge or Template or ANSI 250.13 Windstorm Rated Components

See Product Finishes