Hingesby DoorwaysPlus

Hager ECBB1100 NRP 4 1/2 x 4 1/2 Full Mortise - Ball Bearing Hinge, Steel with plated finish.

Furnished standard with All wood screws (1 1/4" x 12 FPHW) and All machine screws (1/2" 12-24 FPHM)

Hinges are .134 thickness, For 1 3/4" door thickness. For use on medium weight doors or doors requiring low frequency service.

Stock finishes include USP (prime for paint) & US26D. Other finishes available by quote include:  US3, US4, US10B, US15, & US26.

Material: - Steel with Steel pin

- Non-rising removable pin with button tip and plug

- Two ball bearings

ANSI A8112

Non-Removable Pin (NRP) for Medium Security

The Non-Removable pin has a small set screw in the body of the barrel. This set screw is tightened down against the pin. The pin has a groove in the position where the set screw makes contact, allowing the set screw to seat. The set screw is positioned so it cannot be reached unless the door is opened. If pin removal is necessary, the set screw is merely removed and the pin tapped from the bottom in the usual manner.

For more information visit Hager's website on the ECBB1100 hinge or Template

See Product Finishes