Door Bumpersby DoorwaysPlus

View Full-Size Image

Bommer Heavy Duty Door Bumper 175 Series

Door Bumpers

Bommer Heavy Duty Door Bumper, 175 Series

175-19 Door Bumper

- Industrial Type

- Steel .125 thick (ANSI K87434)

- Stainless Steel .109 thick (ANSI K57434)

- Bumper Size 10" high x 19" length x 4" Projection

175-32 Door Bumper

- Industrial Type

- Steel .125 thick (ANSI K87434)

- Stainless Steel .109 thick (ANSI K57434)

- Bumper Size 10" high x 19" length x 4" Projection

Features:

- Back plate protects face of door from wear caused by sliding motion of bumper

- Specify door thickness for proper thru bolt length (1-3/4" Standard)

- Available in Stainless Steel (US32D/ 630) and Prime Coat (USP/ 600) on steel

*** For Template Information on the Bommer 175 Series Door Bumper click here ***

Flexibility of traffic control during and after business hours is offered by 4510 Series Deadlatches. A reverse turn of the key while bolt is held retracted retains the bolt, to allow two- way traffic for hospitals, banks, stores and other buildings which require free entrance at certain times and exit-only at other times. Interchangeable, without stile modification, with any MS1850A or MS1850S deadbolt of same backset and faceplate shape. (They do not, however, provide the same maximum security level as the MS® Deadbolt.)

Cylinder Backset

7/8", 31/32”,1-1/8” or 1-1/2” only.

Case

Steel with corrosion-resistant plating. 1“ x 5-13/16” x depth. (Depth varies by backset)

Latch Bolt

1/2“ x 1” x 1/2” throw. All metal with hardened steel internal pins. Handing is reversible without special tools.

Auxiliary Bolt

All metal. Deadlocks latch bolt to prevent “loiding” or case-knife entry.

Operation

Turn key or operate handle to retract spring-loaded latch bolt. To hold bolt retracted, push it in and secure by reverse turn of key (see back page). Uses any standard mortise cylinder with MS® cam (see page SW-37).

Strikes

Standard strike furnished is 4902-01 for flat jamb where door closes flush or nearly flush.

Also available: radius strike for opposite stile in paired doors; longer strike (4901) to cover slot strike of MS® lock; long lip strikes for centerhung doors. (See page SW-30 and Electric Strike

section.)

Handing must be specified when ordering, if unsure of your door's handing, click here.

Part #

Item Description

Select Option

Qty

Add to cart

175-19

Bommer Heavy Duty Door Bumper 175-19