Please note: Hinges are priced as "each"
and packaged in boxes of 3 each
[Order 3 or 4 each as required per door] |
|
| Half
Mortise |
|
| BB1129 |
 |
| |
| Application
For use on Hollow Metal Doors with Channel Iron Frames requiring
Low Frequency Service |
| |
| Info ::: Five
knuckle ::: Two ball bearings ::: Beveled surface leaf ::: reversible
::: NRP
= Non Removable Pin ::: Supplied with all necessary screws (machine
and/or wood) Please note: Half Mortise
Hinges are Mortised into the edge of the door and surface applied
to the face of the frame |
| |
| 1129
Installation Template |
| |
|
| Hager BB1129 Half Mortise |
| Part # |
Item
Description |
Select
Finish
[See
Finishes] |
Qty |
Add to cart |
BB
1129NRP |
Half Mortise Ball Bearing
w/NRP
4-½" |
|
 |
| |
|
 |
| Half
Surface |
|
| BB1173 |
 |
| |
| Application
For use on Regular Weight Hollow Metal or Wood Composite Doors
with Hollow Metal Frames. Requires Medium Frequency Service. |
| |
Info ::: Five
knuckle ::: Two ball bearings ::: Button tips ::: Beveled surface
leaf ::: Reversible plug ::: Supplied
with all necessary screws (machine and/or wood)
::: Optional NRP
(Non Removeable Pin)
Please note: Half surface hinges
are surface mounted on the face of the door and mortised into
the frame |
| |
| 1173
Installation Template |
| |
|
| Hager BB1173 Half Surface |
| Part # |
Item
Description |
Finish/Price
[See
Finishes] |
Qty |
Add to cart |
BB
1173 |
Half Surface Ball Bearing
4-½" |
|
BB
1173NRP |
Half Surface Ball Bearing
w/NRP
4-½" |
|
|
| |
|
|
| Full
Surface |
|
| BB2171 |
 |
| |
| Application
For use on Medium Weight Hollow Medal or Wood Composite Doors
with Channel Iron Frames requiring Medium Frequency Service.
|
| |
| Info ::: Five
knuckle ::: Two ball bearings ::: Beveled surface edges :::
reversible ::: NRP
= Non Removable Pin ::: Supplied with all necessary screws (machine
and/or wood) |
| |
| 2171
Installation Template |
| |
|
| Hager BB2171 Full Surface |
| Part # |
Item
Description |
Finish/Price
[See
Finishes] |
Qty |
Add to cart |
BB
2171NRP |
Full Surface Ball Bearing
w/NRP
4-½" |
|
|
| |
|
 |
| Spring
Hinges |
|
|
| Hager 1250 Spring Hinge |
| Part # |
Item
Description |
Select
Finish
[See
Finishes] |
Qty |
Add to cart |
| 1250
|
Spring Hinge
4-½" x 4-½" |
|
|
| |
|
|
| Reinforcing
Pivot |
|
| 253 |
 |
| (Left Hand Shown) |
| |
| Application
Hager's reinforcing pivot hinge can be installed without special
preparations by normal maintenance personnel and is a simple
solution to the problem of loose screws, distorted hinge leaves,
pulled open knuckles, sagging doors and splits on wood doors. |
| |
Info ::: The sizing
of Reinforcing Pivots is determined by the overall width of
hinges on the door opening (the centerline of the pivoting point)
::: The width of existing hinges may be determined by opening
the hinge to the 180-degree open position and measuring the
overall width
::: If you have a RHR swing door, use LH pivot
::: If you have a LHR swing door, use RH pivot |
| |
| DoorwaysPlus
Info: Handing Chart |
| |
| 253
More Information |
| 253
Installation Instructions |
| 253
Installation Template |
| |
|
| Hager 253 Reinforcing Pivot |
| Part # |
Item
Description |
Finish/Price
[See
Finishes] |
Qty |
Add to cart |
253
LEFT HAND |
Reinforcing Pivot for
4-½" wide hinges. Left
Hand |
|
253
RIGHT HAND |
Reinforcing Pivot for
4-½" wide hinges. Right
Hand |
|
|
|
|
| Electric
Hinges |
|
Part#
BB1279 ETW & ETM |
 |
| |
Application
The ETW (Electric Through-Wire Only) is
a through-wire hinge which provides 4 continuous electric conductors
for transfer of current or signals from frame to door.
The ETM is a combination of the Hager Through-Wire and Monitoring
Hinges. This hinge offers both 4 continuous electrical conductors
and the concealed monitoring switch. Fully adjustable. |
| |
| Info ::: Supplied
with all necessary screws (machine and/or wood) |
| |
| BB1279ETW
Installation Template |
| |
| BB1279ETM
Installation Template |
| BB1279ETM
Further Information |
| |
|
| Hager BB1279 ETW & BB1279
ETM Electric Hinges |
| Part # |
Item
Description |
Finish/Price
[See
Finishes] |
Qty |
Add to cart |
BB
1279
ETW-4 |
Ball Bearing
Electric Hinge Through-Wire Only*
4-½ x 4-½ |
|
|
BB
1279
ETM-4 |
Ball Bearing
Electric Hinge Through-Wire w/monitoring*
4-½ x 4-½ |
|
|
| *Please double check requirements |
|
|
| Roton Continuous
Hinges |
|
|
| Hager 780-157/HD |
| Part # |
Item
Description |
Aluminum
Finish
Select Model req'd * |
Qty |
Add to cart |
| 780-157
|
Retrofit Full Surface Continuous
Hinge
(83-inch) |
|
|
| *Please double check requirements |
|
|
|
| Hager 780-210/HD |
| Part # |
Item
Description |
Aluminum
Finish
Select Model req'd* |
Qty |
Add to cart |
| 780-210
|
Retrofit Full Surface Continuous
Wide Throw Hinge
(83-inch) |
|
|
| *Please double check model requirements
|
|
The
trouble-free service of Hager Companies through the years is a silent
tribute to the quality standards maintained by the Hager organizations.
