Call Us: (937) 222-1522

Availability: In stock

$125.21

Bommer Heavy Duty Door Bumper 175 Series

Availability: In stock

$125.21

Quick Overview

Bommer Heavy Duty Door Bumper 175 Series - 10 Inch High, Each Side Sold Individually

Bommer Heavy Duty Door Bumper 175 Series

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Bommer Heavy Duty Door Bumper 175 Series
$125.21

Details

Bommer Heavy Duty Door Bumper, 175 Series - 10 Inch High

alt

175-19 Door Bumper

- Industrial Type
- Steel .125 thick (ANSI K87434)
- Stainless Steel .109 thick (ANSI K57434)
- Bumper Size 10" high x 19" length x 4" Projection
 
175-32 Door Bumper
- Industrial Type
- Steel .125 thick (ANSI K87434)
- Stainless Steel .109 thick (ANSI K57434)
- Bumper Size 10" high x 32" length x 4" Projection
 

Features:

- Back plate protects face of door from wear caused by sliding motion of bumper
- Specify door thickness for proper thru bolt length (1-3/4" Standard)
- Available in Stainless Steel (US32D/ 630) and Prime Coat (USP/ 600) on steel
 
Bommer 175-19-600
 

Each Side Sold Individually

*** For Template Information on the Bommer 175 Series Door Bumper click here ***

 
 
 
Flexibility of traffic control during and after business hours is offered by 4510 Series Deadlatches. A reverse turn of the key while bolt is held retracted retains the bolt, to allow two- way traffic for hospitals, banks, stores and other buildings which require free entrance at certain times and exit-only at other  times.  Interchangeable,  without  stile  modification, with any MS1850A or MS1850S deadbolt of same backset and faceplate shape. (They do not, however, provide the same maximum security level as the MS® Deadbolt.)
 
Cylinder Backset
7/8", 31/32”,1-1/8” or 1-1/2” only.
 
Case
Steel  with  corrosion-resistant plating. 1“ x 5-13/16” x depth. (Depth varies by backset)
 
Latch Bolt
1/2“ x 1” x 1/2” throw. All metal with hardened steel  internal  pins.  Handing  is   reversible without special tools.
 
Auxiliary Bolt
All  metal.  Deadlocks  latch  bolt  to  prevent “loiding” or case-knife entry.
 
Operation
Turn key or operate handle to retract spring-loaded latch bolt. To hold bolt retracted, push it in and secure by reverse turn of key (see back page). Uses any standard mortise cylinder with MS® cam (see page SW-37).
 
 
Strikes
Standard strike furnished is 4902-01 for flat jamb where door closes flush or nearly flush.
Also available: radius strike for  opposite stile  in  paired  doors;  longer  strike (4901) to cover slot strike of MS® lock; long lip strikes for centerhung doors. (See page SW-30 and Electric Strike
section.)
 
Handing must be specified when ordering, if unsure of your door's handing, click here.

Additional Information

Dimension N/A
Manufacturer Bommer
Type of Door Protection Door Bumper

Write Your Own Review

You're reviewing: Bommer Heavy Duty Door Bumper 175 Series